http://www.railpictures.ca The BEST Canadian photos on the Internet, eh? Tue, 27 Oct 2026 03:29:50 +0000 hourly 1 http://wordpress.org/?v=3.1 http://www.railpictures.ca/?attachment_id=10619#comment-70823 RonaldB Sat, 10 Oct 2026 04:36:15 +0000 http://www.railpictures.ca/wp-content/uploads/2013/07/20120208-CP6042l-BelleRiverON.jpg#comment-70823 Sanders were integral to smooth operation, especially in the days of less sophisticated locomotive wheelslip systems. Sometimes sanders malfunctioned & depending on where one was, probelms ensued. The first trick was to pound on the hose leading to the sand spout, with a hammer or wrench. That often broke up wet sand. At some locations, sand came in plastic bags where more elaborate facilities didn't exist. One time I was with my hogger preparing to leave the shop at Agincourt with 3 C&O GP-30s. The sanders were checked & didn't work. Shop staff arrived & it was discovered that someone put the empty bags into the sand "locker" along with the sand. The bags had jammed in the chute leading to the pipe. Staff spent a half an hour using various "implements" to pick the bags out of the sand locker. Then the sand worked. Crappy power & a train with full tonnage rating for said power, leads to a trip made much worse by no sand. I could almost write a short story just describing trips that involved sanding failures. Sanders were integral to smooth operation, especially in the days of less sophisticated locomotive wheelslip systems. Sometimes sanders malfunctioned & depending on where one was, probelms ensued. The first trick was to pound on the hose leading to the sand spout, with a hammer or wrench. That often broke up wet sand. At some locations, sand came in plastic bags where more elaborate facilities didn’t exist. One time I was with my hogger preparing to leave the shop at Agincourt with 3 C&O GP-30s. The sanders were checked & didn’t work. Shop staff arrived & it was discovered that someone put the empty bags into the sand “locker” along with the sand. The bags had jammed in the chute leading to the pipe. Staff spent a half an hour using various “implements” to pick the bags out of the sand locker. Then the sand worked. Crappy power & a train with full tonnage rating for said power, leads to a trip made much worse by no sand.
I could almost write a short story just describing trips that involved sanding failures.

]]>